Modul:Paramtest - Versionsgeschichte

FoXFTW: Automated syncing of modules from rev 308be26

2024-04-09T20:17:15Z

Automated syncing of modules from rev 308be26

← Nächstältere Version		Version vom 9. April 2024, 22:17 Uhr
Zeile 43:		Zeile 43:

	function p.is_empty(arg)		function p.is_empty(arg)
	return not ~~string~~.find(arg or '', '%S')		return not mw.ustring.find(arg or '', '%S')
	end		end

Zeile 62:		Zeile 62:

	function p.default_to(arg, default)		function p.default_to(arg, default)
	if ~~string~~.find(arg or '', '%S') then		if mw.ustring.find(arg or '', '%S') then
	return arg		return arg
	else		else
Zeile 88:		Zeile 88:

	function p.has_content(arg)		function p.has_content(arg)
	return ~~string~~.find(arg or '', '%S')		return mw.ustring.find(arg or '', '%S')
	end		end

FoXFTW am 24. Juni 2023 um 18:11 Uhr

2023-06-24T18:11:53Z

← Nächstältere Version		Version vom 24. Juni 2023, 20:11 Uhr
Zeile 15:		Zeile 15:
	\|fname4 = defaults{ {arg1,arg2},...}		\|fname4 = defaults{ {arg1,arg2},...}
	\|ftype4 = {String, Any value}...		\|ftype4 = {String, Any value}...
	\|fuse4 = Does the same as <code>default_to()</code> run over every table passed~~; for technical reasons~~, ~~all <code>nil</code> are replaced with <code>false</code>~~		\|fuse4 = Does the same as <code>default_to()</code> run over every table passed
			\|fname5 = table_is_empty(arg)
			\|ftype5 = Table
			\|fuse5 = Returns true if the table has no content, it does not check if the content of the table contains anything
			\|fname6 = table_has_content(arg)
			\|ftype6 = Table
			\|fuse6 = returns true if the table has content, it does not check if the content of the table contains anything
	}}		}}
	--]]		--]]

			local checkType, checkTypeForNamedArg
			do
			local _libraryUtil = require("libraryUtil");
			checkType = _libraryUtil.checkType;
			checkTypeForNamedArg = _libraryUtil.checkTypeForNamedArg;
			end

	--		--
	-- Tests basic properties of parameters		-- Tests basic properties of parameters
Zeile 29:		Zeile 43:

	function p.is_empty(arg)		function p.is_empty(arg)
	return not string.find(arg or '', '%S')		return not string.find(arg or '', '%S')
			end

			--
			-- Tests if the table parameter is empty
			--

			function p.table_is_empty(arg)
			for _, _ in pairs(arg) do
			return false
			end
			return true
	end		end

Zeile 37:		Zeile 62:

	function p.default_to(arg, default)		function p.default_to(arg, default)
	if string.find(arg or '', '%S') then		if string.find(arg or '', '%S') then
	return arg		return arg
	else		else
	return default		return default
	end		end
	end		end

Zeile 47:		Zeile 72:
	-- Returns a list of paramaters if it has any content, or the default		-- Returns a list of paramaters if it has any content, or the default
	--		--
	function p.defaults(~~...~~)		function p.defaults(args)
	local ret = {}		checkType("defaults", 1, args, "table");
	for i, v in ipairs(~~...~~) do		local ret = {}
	~~if string.find~~(v~~[1] or ''~~, ~~'%S'~~) ~~then~~		for i, v in ipairs(args) do
	~~table~~.~~insert~~(~~ret,~~v[1])		checkTypeForNamedArg("defaults", i, v, "table");
	~~else~~		ret[i] = p.default_to(v[1], v[2]);
	~~-- or false, because nil is removed~~		end
	~~table.insert(ret~~,v[2] ~~or false~~)		return unpack(ret, 1, #args);
	end
	~~end~~
	return unpack(ret)
	end		end

Zeile 66:		Zeile 88:

	function p.has_content(arg)		function p.has_content(arg)
	return string.find(arg or '', '%S')		return string.find(arg or '', '%S')
			end

			--
			-- Tests if the table parameter has content
			-- The same as !table_is_empty, but this is more readily clear
			--

			function p.table_has_content(arg)
			for _, _ in pairs(arg) do
			return true
			end
			return false
	end		end

Zeile 74:		Zeile 108:

	function p.ucfirst(arg)		function p.ucfirst(arg)
	if not arg or arg:len() == 0 then		if not arg or arg:len() == 0 then
	return nil		return nil
	elseif arg:len() == 1 then		elseif arg:len() == 1 then
	return arg:upper()		return arg:upper()
	else		else
	return arg:sub(1,1):upper() .. arg:sub(2)		return arg:sub(1,1):upper() .. arg:sub(2)
	end		end
	end		end

Zeile 88:		Zeile 122:

	function p.ucflc(arg)		function p.ucflc(arg)
	if not arg or arg:len() == 0 then		if not arg or arg:len() == 0 then
	return nil		return nil
	elseif arg:len() == 1 then		elseif arg:len() == 1 then
	return arg:upper()		return arg:upper()
	else		else
	return arg:sub(1,1):upper() .. arg:sub(2):lower()		return arg:sub(1,1):upper() .. arg:sub(2):lower()
	end		end
	end		end

	return p		return p

FoXFTW: Die Seite wurde neu angelegt: „-- Imported from: https://runescape.wiki/w/Module:Paramtest --[[ {{Helper module |name=Paramtest |fname1 = is_empty(arg) |ftype1 = String |fuse1 = Returns true if arg is not defined or contains only whitespace |fname2 = has_content(arg) |ftype2 = String |fuse2 = Returns true if arg exists and does not only contain whitespace |fname3 = default_to(arg1,arg2) |ftype3 = String, Any value |fuse3 = If arg1 exists and does not only contain whitespace, the funct…“

2023-06-24T12:24:56Z

Die Seite wurde neu angelegt: „-- Imported from: https://runescape.wiki/w/Module:Paramtest --[[ {{Helper module |name=Paramtest |fname1 = is_empty(arg) |ftype1 = String |fuse1 = Returns true if arg is not defined or contains only whitespace |fname2 = has_content(arg) |ftype2 = String |fuse2 = Returns true if arg exists and does not only contain whitespace |fname3 = default_to(arg1,arg2) |ftype3 = String, Any value |fuse3 = If arg1 exists and does not only contain whitespace, the funct…“

Neue Seite

-- Imported from: https://runescape.wiki/w/Module:Paramtest

--[[
{{Helper module
|name=Paramtest
|fname1 = is_empty(arg)
|ftype1 = String
|fuse1 = Returns true if arg is not defined or contains only whitespace
|fname2 = has_content(arg)
|ftype2 = String
|fuse2 = Returns true if arg exists and does not only contain whitespace
|fname3 = default_to(arg1,arg2)
|ftype3 = String, Any value
|fuse3 = If arg1 exists and does not only contain whitespace, the function returns arg1, otherwise returns arg2
|fname4 = defaults{ {arg1,arg2},...}
|ftype4 = {String, Any value}...
|fuse4 = Does the same as <code>default_to()</code> run over every table passed; for technical reasons, all <code>nil</code> are replaced with <code>false</code>
}}
--]]
--
-- Tests basic properties of parameters
--

local p = {}

--
-- Tests if the parameter is empty, all white space, or undefined
--

function p.is_empty(arg)
return not string.find(arg or '', '%S')
end

--
-- Returns the parameter if it has any content, the default (2nd param)
--

function p.default_to(arg, default)
if string.find(arg or '', '%S') then
return arg
else
return default
end
end

--
-- Returns a list of paramaters if it has any content, or the default
--
function p.defaults(...)
local ret = {}
for i, v in ipairs(...) do
if string.find(v[1] or '', '%S') then
table.insert(ret,v[1])
else
-- or false, because nil is removed
table.insert(ret,v[2] or false)
end
end
return unpack(ret)
end

--
-- Tests if the parameter has content
-- The same as !is_empty, but this is more readily clear
--

function p.has_content(arg)
return string.find(arg or '', '%S')
end

--
-- uppercases first letter
--

function p.ucfirst(arg)
if not arg or arg:len() == 0 then
return nil
elseif arg:len() == 1 then
return arg:upper()
else
return arg:sub(1,1):upper() .. arg:sub(2)
end
end

--
-- uppercases first letter, lowercases everything else
--

function p.ucflc(arg)
if not arg or arg:len() == 0 then
return nil
elseif arg:len() == 1 then
return arg:upper()
else
return arg:sub(1,1):upper() .. arg:sub(2):lower()
end
end

return p